ME-VM-50-PC

Vickers ME-VM-50

Product Details:

Test load
  • 5, 10, 20, 30, 50 kg.
Standards
  • IS:1754-1968

Mechatronic Engineers’ Vickers Hardness Tester is simple & accurate in design. It is suitable for measuring the hardness of precision metallic parts with a wide testing range from soft to hard & their accurate results are widely acclaimed. These testers strictly conform to IS:1754-1968.

Features

  • Tiny indentation allows the testing of precision finished parts.
  • The thin sheet metal is perfectly tested. Because the applied load is very small.
  • Motorized loading and unloading cycle.
  • Built-in projection screen to get accurate results.
  • The same hardness number is obtained on the same specimen, regardless of the load applied.
  • Wide testing range, from a soft metal such as lead, Up to the hardest, like hardened steel. 

Example

VICKERS-HARDNESS-TESTING-MACHINE-ME-VM-50

The applied objective with 70x magnification Length of diagonal of indentation 742 microns = 0.742

Technical Specifications & Standard Accessories

Technical Data
Test Loads5, 10, 20, 30, 50 kg.
Magnification of optical projection70X
Max. Test Height (mm.)200
Scale least count(mm.)0.001
Depth of throat (mm.)133
Dimensions of Machine (mm.)L585xW290xH860
Weight (Approx)73kg.
Power Supply220V AC, 50 Hz, 1-Phase
Standard Accessories
1. Standard Test Block1 pc.
2. Diamond Penetrator1 pc.
3. Weights1 set.
4. Flat Anvil1 pc.
5. Vee-type Anvil (Small and Big)1 pc. each
6. Spanners1 set.
7. Electric cord1 pc.
8. Instruction Manual1 book

Construction

To accommodate the high precision loading system & an optical projection screen, the machine frame is designed sturdy. The specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied to a diamond penetrator by means of a lever & weights. The load is removed automatically after a specific lapse of time. The objective is indexed with the test piece & the diamond indentation is projected on the measuring screen. The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Scroll to Top